Technical Library

Anti-Aging Moisturizing Serum with SPF

This serum has the application feel of a rich moisturizer without a heavy or greasy after feel. Vertasil® Tocopheryloxypropyltrisiloxane TM-VE1 adds emollience and softening benefits. Sibrid® Stearyl Methicone TM-181, with a higher viscosity than caprylyl methicone, contributes to the serum’s lubricious feel while providing a smooth application and weightless feel on skin. SiBrid® Diethicone DE-12 improves spreadability and eliminates tack.

INCI NameIngredient SupplierWeight %
Phase A
Stearyl MethiconeSiBrid® Stearyl Methicone TM-181Gelest8.30
PolydiethylsiloxaneSiBrid® Diethicone DE-12Gelest3.00
TocopheryloxypropyltrisiloxaneSiBrid® Tocopheryloxypropyltrisiloxane TM-VE1Gelest1.00
Polyglyceryl Oleate----1.00
Glycol Distearate----0.75
Magnesium Stearate----0.75
Cetyl PEG/PPG-10/1 DimethiconeJeesilc EM90Jeen International2.00
Homosalate----5.00
Octocrylene----5.00
Avobenzone----3.00
Phase B
WaterDeionized Water--q.s.
Propylene Glycol----5.00
Sodium Chloride----1.00
Water (&) Butylene Glycol (&) Portulaca Oleracea L. ExtractPurslane ExtractSK Biolandq.s.
Phase C
Fragrance (Parfum)Delicate PetalsPremier Specialtiesq.s.
Preservative--Schülkeq.s.
Procedure:

  • Combine Phase A while heating to 75 °C .

  • Combine Phase B and mix well until incorporated.

  • Using a homogenizer, slowly add Phase B to Phase A.

  • Finish with fragrance and preservative.

  • SPF: not tested
  • Body Lotion with Vertasil® Limonenyltrisiloxane TM-L01

    Vertasil® Limonenyltrisiloxane TM-L01 imparts light emolliency and excellent slip to a body lotion that applies easily to ease dryness and correct uneven skin tone.

    INCI NameIngredient SupplierWeight %
    Phase A
    WaterDeionized Water--70.67
    Fluorophlogopite, Titanium DioxideSpectrafex Focus Red--0.50
    CarbomerUltrez 10--0.20
    Butylene Glycol----4.00
    Methylparaben----0.30
    Polysorbate-60Tween 60--1.00
    Disodium EDTA----0.05
    TromethamineTris Amino--1.00
    WaterDeionized Water--3.00
    Phase B
    Limonenyl Trisiloxane Methylcyclohexenyl Isopropyl TrisiloxaneVertasil® Limonenyltrisiloxane TM-L01Gelest5.00
    Octyldodecyl StearateCeraphyl ODS--9.00
    Stearic AcidEmersol 132--2.00
    Glyceryl StearateCerasynt SD--1.00
    Sorbitan StearateSpan 60--1.00
    Propylparaben----0.10
    DMDM HydantoinGlydant--0.18
    WaterDeionized Water--1.00

    Dry Skin Cream (Water/Oil) with SiBrid® Diethicone DE-23

    SiBrid® Diethicone DE-23 is a rich emollient that provides a cushiony and substantive feel to skin care products.

    INCI NameIngredient SupplierWeight %
    Phase A
    WaterDeionized Water--q.s.
    Magnesium Sulfate----0.20
    Butylene Glycol----6.00
    Preservative----q.s.
    Phase B
    CyclopentasiloxaneDC® 245 FluidDow Silicones15.00
    PolydiethylsiloxaneSiBrid® Diethicone DE-23Gelest10.00
    PEG-9 Polymethylsiloxyethyl DimethiconeKF 6038Shin-Etsu4.00
    Cyclopentasiloxane (&) Dimethicone/Vinyl Dimethicone CrosspolymerUSG 103Shin-Etsu3.00
    Phase C
    Laureth-7Rhodasurf®L-7/90Solvay0.50
    Preservative----q.s.
    Procedure:

  • Premix Phase A under propeller blade.

  • Combine Phase B and homogenize slowly until homogenous.

  • Premix Phase C and add to Phase B. Homogenization until blended.

  • Slowly add Phase A to Phase BC under slow homogenization.

  • Homogenize strongly for an additional 5 minutes.
  • Intense Treatment Patches with Vertasil® TM-CBD1

    INCI NameIngredientSupplierWeight %
    Phase A
    PolydimethylsiliconeGelest® Gel D200, Part AGelest54.50
    PropyltrisiloxaneSibrid® Propyltrisiloxane TM-031Gelest18.00
    Trimethylsiloxysilicate ResinDowsil MQ 1600Dow18.00
    Fumed SilicaCAB-O-SIL M5--2.00
    Trisiloxanyl-CannabidiolVertasil® Cannabidiol Trisiloxane TM-CBD1Gelest0.50
    Phase B
    Pigments----0.08
    Polydiethylsiloxane----0.07
    Phase C
    PolydimethylsiliconeGelest® Gel D200, Part BGelest7.00
    Procedure:

  • Combine ingredients from Phase A and mix thoroughly

  • Mix Phase B ingredients and mill in a roller mill to properly disperse pigments

  • Add Phase A + B and mix thoroughly

  • Add Phase C to A + B and mix thoroughly

  • Pour formula into an appropriate form and cure at 120 °C for 1 hour
  • Moisturizer with SPF and SiBrid® Diethicone DE-12

    SiBrid® Diethicone DE-12 fluid is a light emollient that is an exceptional vehicle for pigment wetting and dispersions. it is compatible with organic compounds, including sunscreens, and provides improved spreading and blending to formulations.

    INCI NameIngredient SupplierWeight %
    Phase A
    PolydiethylsiloxaneSiBrid® Diethicone DE-12Gelest7.00
    Titanium DioxideSunscreen Grade Titanium Dioxide--5.00
    Phase B
    WaterDeionized Water--q.s.
    Magnesium Sulfate----0.20
    Butylene Glycol----6.00
    Preservative----q.s.
    Phase C
    Ethylhexyl MethoxycinnamateEscalol® 557Ashland7.50
    Octyldodecyl StearateCeraphyl® ODSAshland5.10
    PEG/PPG 10/1 Cetyl DimethiconeAbil® EM 90Evonik5.00
    Myristyl MethiconeSiBrid® Myristyl MethiconeGelest2.50
    BeeswaxWhite Beeswax--1.00
    Hydrogenated Castor OilCastor Wax® MP80Vertellus0.50
    Procedure:

  • Disperse Phase A using a three roll mill.

  • Combine Phase C and heat to 85 °C. Cool to 70 °C while mixing.

  • Add Phase A to Phase C under slow homogenization.

  • Combine first two ingredients in Phase B and stir until dissolved.

  • Add remaining ingredients to Phase B and mix while heating Phase B to 70 °C.

  • At 70 °C, slowly add Phase B to Phase AC and homogenize until emulsified.

  • Mix for an additional 5 minutes while holding heat.

  • Cool to 30 °C with paddle blade.
  • Night Moisturizer with Vertasil® TM-VE1

    Vertasil® TM-VE1, a unique hybrid fluid, is created by adding a small siloxane segment to vitamin E. In skin care, it provides a rich feel with softening and moisturizing properties.

    INCI NameIngredient SupplierWeight %
    Phase A
    WaterDeionized Water--q.s.
    CarbomerCarbopol ®Ultrez 10Lubrizol0.20
    Phase B
    Butylene Glycol----4.00
    Polysorbate 60Tween™ 60Croda1.00
    Disodium EDTA----0.05
    WaterDeionized Water--3.00
    TromethamineTris Amino®Dow1.00
    Phase C
    Octyldodecyl StearateCeraphyl® ODSAshland9.00
    Tocopheryloxypropyl TrisiloxaneVertasil® TM-VE1Gelest5.00
    Stearic AcidEmersol® 132Emery2.00
    Glyceryl StearateCerasynt® SDAshland1.00
    Sorbitan StearateSpan™ 60Croda1.00
    Phase D
    WaterDeionized Water--q.s.
    Preservative----q.s.
    Fragrance----q.s.
    Procedure:

  • Combine Phase A and disperse until thickened while heating to 75 °C.

  • Combine Phase B and add to Phase A.

  • Combine Phase C and heat to 80 °C under a slow stir.

  • At 75 °C, add Phase C to Phase AB and slowly homogenize until emulsified.

  • Continue to mix while cooling.

  • At 35 °C, add Phase D and cool to RT while mixing.