Technical Library

Show
Outline
Outline

Cucumber Smoothie Color Correcting Primer

Cucumber Smoothie Color Correcting Primer with Vertasil® TM-L01, SiBrid® DE-12, and SiBrid® PM-212

Banish embarrassing facial redness and and soften those worry lines and wrinkles over your cyclopentasiloxane (D5) concerns. Gelest’s Vertasil® TM-L01, as used in this Cucumber Smoothie Primer, can provide a similar lightweight, non oily feel during application with more substantive and silkier after-feel than cyclopentasiloxane. This primer can be used alone as a soft focus and color correcting serum or as a primer under makeup.

INCI NameIngredientSupplierWeight %
Phase A
Dimethicone/Vinyl Dimethicone Crosspolymer----q.s.
PolydiethylsiloxaneSiBrid® Diethicone DE-12Gelest15.00
Methylcyclohexenyl Isopropyl TrisiloxaneVertasil® Limonenyltrisiloxane TM-L01Gelest15.00
Lauryl Phenylpropyl MethiconeSiBrid® PM-212Gelest2.00
TocopherolVitamin EDSM1.00
Actives----q.s.
Phase B
PolydiethylsiloxaneSiBrid® Diethicone DE-12Gelest1.00
Chromium Oxide Green (&) (&) Stearyl TriethoxysilaneChromium Oxide Green SSGelest0.10
Phase C
Iron Oxides (&) Mica (&) Titanium Dioxide (&) Stearyl TriethoxysilanePearl, SS-treatedGelest2.50
Nylon-12 (&) Sodium HylauronateOrgasol® HydraVantage2.50
Methyl Methacrylate Crosspolymer----2.50
FragranceCucumber & Green TeaThe Lebermuth Co0.20
Preservative----q.s.
Procedure:

  • Mix Phase A under propeller blade.

  • Predisperse Phase B. Add Phase B to Phase A and mix until uniform.

  • In order, add Phase C to Phase AB and mix until dispersed and uniform.
    		•

    Long-Wearing Foundation (Water-in-Silicone)

    Long-Wearing Foundation (Water-in-Silicone)

    SiBrid® DE-12 is a light emollient that provides excellent spreading and blending and is also an exceptional vehicle for pigment wetting and dispersion. The Gelest SS treated pigments create a smooth, creamy feel.

    INCI NameIngredientSupplierWeight %
    Phase A
    WaterDeionized Water--49.10
    Magnesium Sulfate----0.20
    Butylene Glycol----6.00
    Benzoic Acid----0.20
    Phase B
    C30-45 Alkyl Cetearyl Dimethicone CrosspolymerVelvesil 125Momentive10.00
    Cyclopentasiloxane----5.00
    Lauryl PEG-9 Polydimethylsiloxyethyl DimethiconeKF 6038Shin-Etsu3.00
    PolydiethylsiloxaneSiBrid® Diethicone DE-12Gelest5.00
    Laureth-7Rhodasurf L-790Solvay0.50
    Phase C
    Titanium Dioxide (&) TrimethylsiloxysilicateTitanium Dioxide SRGelest8.00
    Iron Oxides (&) TrimethylsiloxysilicateYellow Iron Oxide SRGelest1.20
    Iron Oxides (&) TrimethylsiloxysilicateRed Iron Oxide SRGelest0.50
    Iron Oxides (&) TrimethylsiloxysilicateBlack Iron Oxide SRGelest0.20
    Talc (&) TrimethylsiloxysilicateTalc SRGelest4.10
    PolydiethylsiloxaneSiBrid® Diethicone DE-12Gelest7.00

    Loose Face Powder

    Let’s Shake It Up: Loose Face Powder with SS Pigments

    SS pigments

    INCI NameIngredientSupplierWeight %
    Phase A
    Mica (&) Stearyl Triethoxysilane Serecite (Mica) SSGelest55.00
    Talc (&) Stearyl Triethoxysilane Talc SSGelest20.35
    Nylon 12 (&) Sodium HyaluronateOrgasol® Hydra+Arkema10.00
    Boron NitridePUHP500Saint Gobain5.00
    Zinc Stearate921Brenntag4.00
    Titanium Dioxide (&) Stearyl Triethoxysilane Titanium Dioxide SSGelest1.70
    Iron Oxides (&) Stearyl Triethoxysilane Yellow Iron Oxide SSGelest0.90
    Iron Oxides (&) Stearyl Triethoxysilane Red Iron Oxide SSGelest0.30
    Iron Oxides (&) Stearyl Triethoxysilane Black Iron Oxide SSGelest0.10
    Ultramarines (&) Stearyl Triethoxysilane Ultramarine Blue SSGelest0.05
    Phase B
    PolydiethylsiloxaneSiBrid® Diethicone DE-12Gelest1.00
    Isostearyl NeopentanoateSchercemol™ 185 esterLubrizol1.00
    Preservative----q.s.
    Procedure:

  • Mill pigments until dispersed.

  • Premix Phase B and add dropwise or spray onto powder. Mix thoroughly until wet.

  • Mill if necessary.

  • Press into pans.
    		•

    Moisturizing & Long-Wearing CC Cream

    Moisturizing and Long-Wearing CC Cream

    To create a long-wearing and lightweight Water/Oil CC cream, incorporate our Sebum Resistant (SR)-treated pigments by prewetting with SiBrid® DE-12, an oxygen permeable silicone fluid that can be used as wetting agent, slip agent, and oil phase fluid. Sibrid® Caprylyl Methicone TM-081 adds additional play time and slip upon application while Sibrid® Propyl Trisiloxane TM-031 is used as an oil phase solvent.

    INCI NameIngredientSupplierWeight %
    Phase A
    PolydiethylsiloxaneSiBrid® Diethicone DE-12Gelest6.00
    Titanium Dioxide (&) TrimethylsiloxysilicateTitanium Dioxide SRGelest6.30
    Iron Oxides (&) TrimethylsiloxysilicateYellow Iron Oxide SRGelest1.25
    Iron Oxides (&) TrimethylsiloxysilicateRed Iron Oxide SRGelest0.35
    Iron Oxides (&) TrimethylsiloxysilicateBlack Iron Oxide SRGelest0.25
    Ultramarines (&) TrimethylsiloxysilicateUltramarine Blue SRGelest0.05
    Ethylhexyl Palmitate----5.00
    Caprylyl MethiconeSiBrid® Caprylyl Methicone TM-081Gelest5.00
    PropyltrisiloxaneSiBrid® Propyltrisiloxane TM-031Gelest5.00
    Cetyl PEG/PPG-10/1 DimethiconeJeensilc EM90Jeen Int2.30
    Polyglyceryl Oleate----1.00
    Sodium Chloride----1.00
    TocopheryloxypropyltrisiloxaneSiBrid® Tocopheryloxypropyltrisiloxane TM-VE1Gelest0.75
    Glycol Distearate----q.s.
    Phase B
    WaterDeionized Water--q.s.
    Propylene Glycol----5.00
    Sodium Chloride----1.00
    Water/Butylene Glycol/Portulaca Oleracea L. ExtractPurslane ExtractSK Biolandq.s.
    FragranceDelicate PetalsPremier Specialtiesq.s.
    Preservative--Schülkeq.s.
    Procedure:

  • Combine Phase A and heat to 75 °C.

  • Combine Phase B and mix well until incorporated.

  • Under a homogenizer, slowly add Phase B into Phase A and mix until emulsified.

  • Sweep while cooling batch.

  • Finish with fragrance and preservative.
    		•

    Powder Cream Concealer

    Powder Cream Concealer with ML Pigments and SerebriteTM SS

    This high coverage formula applies like a cream, yet has the dry feel of a powder. Dimethicone Maximum Loading (ML) pigments allow for higher pigment loading due to low oil absorption and excellent wetting proprieties. Seribrite™ SS is added as a boron nitride replacement due to its whiteness, slip, and creamy feel upon application.

    INCI NameIngredientSupplierWeight %
    Phase A
    Ethylhexyl PalmitateCeraphyl® 368Ashland12.00
    TribeheninSyncrowax™ HRCCroda4.50
    C30-45 Alkyl MethiconeAMS C-30Dow Silicones4.50
    C20-40 AlcoholsPerformacol™ 425New Phase Technology0.25
    Benzoic Acid----0.10
    Ascorbic Palmitate----0.05
    Phase B
    Ethylhexyl PalmitateCeraphyl® 368Ashland20.60
    Polyglyceryl-3 DiisostearateCithrol™ PG3D2Croda1.00
    Quaternium-18 HectoriteBentone® 38VElementis0.20
    Titanium Dioxide (&) Dimethicone PEG-3 LaurateTitanium Dioxide MLGelest19.70
    Iron Oxides (&) Dimethicone PEG-3 LaurateYellow Iron Oxide MLGelest2.50
    Iron Oxides (&) Dimethicone PEG-3 LaurateRed Iron Oxide MLGelest0.85
    Iron Oxides (&) Dimethicone PEG-3 LaurateBlack Iron Oxide MLGelest0.15
    Talc (&) Dimethicone PEG-3 LaurateTalc MLGelest18.60
    Mica (&) Stearyl TriethoxysilaneSeribriteTM SSGelest15.00
    Procedure:

  • Combine Phase A and heat to 80 °C under stirring.

  • Add Phase B and mix on three roll mill to disperse.

  • Reheat to 70 °C and pour.
    		•

    Satin Feel Foundation

    Satin Feel Foundation with SiBrid® DE-12 and SS Pigments

    Gelest’s Silky Slip (SS) pigments and SiBrid® DE-12 promote easier spreading and blending on skin while providing an exceptionally soft and moist after-feel to liquid foundations. SiBrid® DE-12 is an excellent vehicle for wetting and dispersing pigments.

    INCI NameIngredientSupplierWeight %
    Phase A
    WaterDeionized Water--49.10
    Magnesium Sulfate----0.20
    Phase B
    Butylene Glycol----6.00
    Benzoic Acid----0.20
    Phase C
    PolydiethylsiloxaneSiBrid® Diethicone DE-12Gelest5.00
    CyclopentasiloxaneDC 245 FluidDow Silicones5.00
    Lauryl PEG-9 Polydimethylsiloxyethyl DimethiconeKF 6038Shin Etsu3.00
    Cyclopentasiloxane & C30-45 Alkyl Cetearyl Dimethicone CrosspolymerVelvesil 125Momentive10.00
    Phase D
    Laureth-7Rhodasurf L-7/90Solvay0.50
    Phase E
    PolydiethylsiloxaneSiBrid® Diethicone DE-12Gelest12.00
    Titanium Dioxide (&) Stearyl TriethoxysilaneTitanium Dioxide SSGelest8.00
    Talc (&) Stearyl TriethoxysilaneTalc SSGelest4.10
    Iron Oxides (&) Stearyl TriethoxysilaneYellow Iron Oxide SSGelest1.20
    Iron Oxides (&) Stearyl TriethoxysilaneRed Iron Oxide SSGelest0.50
    Iron Oxides (&) Stearyl TriethoxysilaneBlack Iron Oxide SSGelest0.20
    Procedure:

  • Mix Phase A under propeller blade. Premix Phase B while warming to dissolve.

  • Add Phase B to Phase A and stir. Premix first three ingredients in Phase C. When uniform, add remaining ingredient and slowly homogenize.

  • Add Phase D to Phase C and homogenize.

  • Premill Phase E. Add Phase E to Phase CD and homogenize until dispersed.

  • Add Phase AB to Phase CDE and continue homogenizing until emulsified.

  • Increase speed and homogenize for additional 5 minutes.
    		•

    Velvety Concealer 1

    Velvety Concealer with HS Pigments

    In water-based systems, Hydrosperse (HS) pigments disperse easily without high shear, develop fully in color and tinting strength, and show reduced color flotation.

    INCI NameIngredient SupplierWeight %
    Phase A
    WaterDeionized Water--q.s.
    Polysorbate 60Tween™ 60Croda0.10
    Magnesium Aluminum SilicateVeegum®Vanderbilt0.70
    Sodium Lithium Magnesium SilicateLaponite® XLGEckart0.30
    Phase B
    Titanium Dioxide (&) Disodium Carboxyethyl SiliconateTitanium Dioxide HSGelest16.00
    Iron Oxides (&) Disodium Carboxyethyl SiliconateYellow Iron Oxide HSGelest1.60
    Iron Oxides (&) Disodium Carboxyethyl SiliconateRed Iron Oxide HSGelest0.60
    Iron Oxides (&) Disodium Carboxyethyl SiliconateBlack Iron Oxide HSGelest0.16
    Talc (&) Disodium Carboxyethyl SiliconateTalc HSGelest1.64
    Phase C
    Butylene Glycol----6.00
    Cellulose GumCMC7H3SFEvonik0.10
    Polysorbate 60Tween™ 60Croda0.40
    Preservative----q.s.
    Phase D
    Potassium Cetyl PhosphateAmphisol® KDSM2.00
    Phase E
    PolydiethylsiloxaneSibrid® Diethicone DE-12Gelest12.00
    Ethylhexyl PalmitateCeraphy® 368Ashland5.00
    Glyceryl StearateCerasynt® SDAshland1.50
    Sorbitan StearateSpan™ 60Croda1.00
    Preservative----q.s.
    Procedure:

  • In order, add Phase A ingredients to water and homogenize while heating to 70 °C.

  • Once hydrated, add Phase B and continue mixing.

  • In Phase C, premix butylene glycol and gum, add to Phase AB, and homogenize. Add remainder of Phase C to Phase ABC.

  • Slowly mix Phase D into batch until dissolved and continue homogenization at 80 °C. Combine Phase E and heat to 80 °C. Slowly add Phase E to Phase ABCD. Homogenize for 15 minutes at 80 °C. Cool under mixing to 30 °C.
    		•

    Velvety Concealer 2

    Velvety Concealer with Skin Friendly (SF) pigments

    INCI NameIngredient SupplierWeight %
    WaterDeionized Water--q.s.
    Polysorbate 60Tween™ 60Croda0.10
    Magnesium Aluminum SilicateVeegum®Vanderbilt0.70
    Sodium Lithium Magnesium SilicateLaponite® XLGEckart0.30
    Titanium Dioxide (&) Triethoxysilylpropyl Acetyl HydroxyprolinateTitanium Dioxide SFGelest16.00
    Iron Oxides (&) Triethoxysilylpropyl Acetyl HydroxyprolinateYellow Iron Oxide SFGelest1.60
    Iron Oxides (&) Triethoxysilylpropyl Acetyl HydroxyprolinateRed Iron Oxide SFGelest0.60
    Iron Oxides (&) Triethoxysilylpropyl Acetyl HydroxyprolinateBlack Iron Oxide SFGelest0.16
    Talc (&) Triethoxysilylpropyl Acetyl HydroxyprolinateTalc SFGelest1.64
    Butylene Glycol----6.00
    Cellulose GumAqualon® CMC7H3SFAshland0.10
    Polysorbate 60Tween™ 60Croda0.40
    Preservative----q.s.
    Potassium Cetyl PhosphateAmphisol® KDSM2.00
    PolydiethylsiloxaneSibrid® Diethicone DE-12Gelest12.00
    Ethylhexyl PalmitateCeraphy® 368Ashland5.00
    Glyceryl StearateCerasynt® SDAshland1.50
    Sorbitan StearateSpan™ 60Croda1.00
    Preservative----q.s.
    PropyltrisiloxaneSiBrid® Propyltrisiloxane TM-031Gelest4.00
    Previous: Eyeshadows
    Next: Hair Care